3.
Remove the four marked Phillips screws and
then pull the mounting plate together with the
electronics out of the surface-mounted
housing.
4.
The surface-mounted housing can now be
mounted on a suitable surface with the aid of
the oblong holes provided. Then establish
the electrical wiring connection as described
in the chapter "Electrical connection".
5.
Place the mounting plate together with the
electronics in the surface-mounted housing
and then screw it to the surface-mounted
housing using the four marked Phillips
screws.
6.
Plug the ribbon cable with the blue marking
upwards into the terminal block at the back of
the display and fix it with the grey lever.
15
