Operation
The unit has a variety of operating
modes.
The infrared remote control
provided by the factory
or the cabled remote control
that is available as an accessory
can be used to operate up to
32 units within a REMKO bus
or individually.
At the same time, operation can
be carried out via an external
controller with a three-stage fan
speed, via a room temperature
controller that is available
as an accessory or via a controller
that is provided by the customer
(e.g. CBCS).
Furthermore, the fan motor can be
controlled virtually infinitely via
an external 0 - 5V or 0 - 10V signal.
Use the separate operating manuals
for this purpose.
Help by reducing energy usage
in stand-by mode! If the unit,
the system or the components
are not being used, we
recommend disconnecting
the power supply.
Our recommendation does
not apply to safety relevant
components.
TIP
Operation with an external 0 - 5/10V signal and infinitely
variable fan operation via external controller
0 - 5/10V
signal
Group control with three-stage fan operation via an external
controller
Switching relay
CBCS
Controller
provided
by the
customer
Single operation with five-stage fan operation via IR
or alternative cabled remote control
Control in REMKO networks with five-stage fan control
and group operation on all slave units
Master
alternative operation
alternative operation alternative operation
Slave
Slave
Control in REMKO networks with five-stage fan control
and single control on specific slave units
Master
Master
addressing
Slave 1
addressing
Slave 2
addressing
Slave
Slave
Single control with three-stage fan operation via an external
controller
CBCS
Controller
provided
by the
customer
7
