A symbol is shown on the display to indicate that the settings are being transferred.
Key functions
POWER Key
Press the POWER key to activate/deactivate the indoor unit. The pro-
grammed settings and parameters are shown on the display before the
unit switches off.
POWER
TEMP Key
The TEMP key is used to set the desired target temperature in 1 °C steps.
This setting is not possible in FAN recirculation mode.
TEMP
TEMP
RESET Key
Use a small pen or similar to press recessed key R. All the symbols will
appear on the display.
After approx. 5 seconds, only the time will flash on the display.
After pressing recessed key C, press and hold the TIME-SET key to set
the time.
Once it has been set, press the C key again to save the time. The display
will stop flashing.
R
5 sec.
C
TIME Key
Use a small pen or similar to press recessed key C, the time will flash
on the display. Press and hold the TIME-SET key to, at first slowly,
and then quickly adjust the clock time. Once it has been set, press
the C key again to save the time. The display will stop flashing.
TIME-SET
C
C
Setting the time
REMKO KWD EC series
10
