MODE Key
Press the MODE key once or repeatedly to switch to automatic mode.
In this mode, the controller automatically selects COOL or HEAT mode
depending on the temperature. The temperature is then maintained
at the set value. The prerequisite is that sufficient cooling or heating
medium at an appropriate temperature is available.
The FAN should be set to AUTO.
Press the MODE key to change to another mode. A total of 5 modes
are available:
1.
COOL/HEAT
Automatic mode, automatic selection of cooling
or heating mode
2.
COOL
Cooling mode, mainly used in summer
3.
DRY
Dehumidification mode, summer or winter mode
4.
FAN
Recirculation mode, no cooling or heating output
5.
HEAT
Heating mode, mainly used in winter
MODE
MODE
MODE
MODE
Auto MODE
Press the MODE key once or repeatedly to switch to cooling mode.
Use this mode to cool the room air to the desired target temperature.
Press the TEMP / keys to set the desired room temperature
in 1 °C steps. If the room temperature is 1 °C above the desired
temperature and sufficient coolant is available, the indoor unit will start
to cool the room air. If the actual temperature falls approx. 0.5 °C below
the set room temperature, the controller switches cooling off.
Cool MODE
MODE
COOLING MODE
MODE
TEMP
COOLING
or
HEATING
The target temperature is
below
the room temperature
The target temperature is
above
the room temperature
Dry MODE
Press the MODE key once or repeatedly to switch to dehumidification
mode. Use this mode to dehumidify the room in an unregulated fashion.
After pressing the DRY key, select the desired temperature and fin
position. It is not possible to set the fan speed. The fan is switched off
at certain intervals to lower the temperature at the cooling battery.
The low temperature causes the air temperature at the fins to fall below
the dew point. Excess humidity in the air condenses on the cooling
battery and the room is dehumidified.
MODE
DEHUMIDIFICATION MODE
11
