Type of task
Checks / Maintenance / Inspection
Commissioning
Monthly
Half-yearly
Yearly
General
•
•
Medium cycle bleeding
•
•
Check medium filling
•
•
Contamination of fin register
•
•
Filter contamination
•
•
Check voltage and current
•
•
Check function of fan
•
•
Check condensate drainage
•
•
Check insulation
•
•
Care and maintenance
Regular care and maintenance
ensure the trouble-free operation
and long service life of the unit.
Care and maintenance work
may only be carried out
if the unit is disconnected.
CAUTION
Care
■
Ensure the unit is protected
against dirt, mould and other
deposits.
■
Clean the unit using a damp
cloth. Do not use any caustic,
abrasive or solvent-based
cleaning products. Do not use
a jet of water.
■
Clean the fins on the unit prior
to long shutdown periods.
Maintenance
■
We recommend that you take
out a maintenance contract
with an annual service
from an appropriate specialist
firm.
Cleaning the cover
1. Disconnect the power supply
to the unit.
2. Open and fold down the air
inlet guard on the cover.
3. Clean the grill and cover
with a soft, damp cloth.
4. Switch the power supply back on.
Air filter for indoor unit
Clean the air filter at intervals
of no more than 2 weeks.
Reduce this interval if the air is
especially dirty.
A maintenance contract will
guarantee that your system
always operates reliably!
TIP
Shutdown
Temporary shutdown
1.
Let the unit run for 2 to 3 hours
in circulation mode, or in cooling
mode at maximum temperature,
to extract any residual humidity
from the unit.
2. Shut down the system using
the controller.
3. Switch off the power supply
to the unit.
4. Check the unit for visible
signs of damage and clean it
as described in the "Care
and maintenance" chapter.
Permanent shutdown
Ensure that units and components
are disposed of in accordance
with local regulations, e.g. through
authorised disposal and recycling
specialists or at collection points.
REMKO GmbH & Co. KG or your
contractual partner will be pleased
to provide a list of certified firms
in your area.
17
