“Set” key
Press the “Set” key to enter the settings menu. Press the “Set” key or the arrow keys again to select the
desired function. The corresponding function flashes on the display of the remote control. Press the “OK” key
to select it.
Fig. 23: “Set” key
The additional functions are shown in the following order:
BioClean function ( )
Sleep function ( )
Follow-Me function ( )
Network configuration (
)
If your remote control has the “Fresh” and “Sleep keys, these functions cannot be operated via the “SET”
key.
“BioClean” function ( )
When the BioClean function is activated, negatively charged ions are released into the air stream to increase
the air quality.
Sleep function
The sleep function can be used to save energy during night operation. This function is not available in the
“Recirculation” and “Humidification” operating modes. The “Sleep” key should be pressed before going to
bed. In cooling mode, the unit will increase the setpoint by 1 °C after 1 operating hour. After another oper-
ating hour, the temperature is increased by 1 °C again. In heating mode, the setpoint is lowered by the previ-
ously mentioned parameters.
The sleep function deactivates automatically after an operating time of 8 hours.
AP mode (network configuration)
Not available for all unit types and can only be used in combination with the optional REMKO WifiStick. AP
mode can be activated by pressing the “LED” key several times within 10 seconds. The unit is now in net-
work configuration mode. For integration via WLAN, please observe the assembly and operating instructions
of the REMKO Wifi-Stick.
REMKO SKW series
22
Содержание HITLINE SKW 261 DC
Страница 67: ...REMKO 67 ...
