ENG
Dirty water tank maintenance
1. To remove the dirty water
tank, press the button
recessed into the tank cover.
2. By pressing the button, pull the
dirty water tank towards you by
the handle and pull it out.
3. While holding the tank cover by
the recesses on both sides of
the filter, remove it out of the
tank with a movement «up».
4. Pour out the dirty water with
debris from the tank. Then
rinse the dirty water tank. For
a more thorough cleaning of
the tank, use a special brush
that is included in the kit.
6. Rinse the tank cover and HEPA
filter under running water.
5. Remove the HEPA filter
from the tank cover.
Installing the roller brush
Install the roller brush by first inserting it into the right side of the main brush and then
pressing lightly on the tab until it locks in place.
Use the supplied roller carpet brush to clean carpets or carpets.
Install the transparent roller brush cover, after aligning the tabs on it with the grooves of
the main nozzle, as shown in the figure. Insert the tabs into the slots and press the latch on
the transparent cover until you hear a click.
Installation of the transparent cover for the roller brush
Main nozzle
Align the groove
7. Let the parts dry. It takes
24 hour to completely dry
the HEPA filter.
8. Place the dry and clean HEPA-
filter back on the tank cover.
9. Place the dirty water tank
back into the appliance as
shown in the figure.
Press on
Tabs
Latch
Press on
• Place the station on a dry and level surface.
• Connect the power supply to the station. The power
supply socket is located on the back of the station.
Plug the power adapter into a power outlet.
Installation of a charging and self-cleaning station
• In order to start charging the appliance, align the
appliance with the charging station - power pins
of the battery should contact with those of the
charging station, as shown in the figure.
