REMET CNC TECHNOLOGY SP. Z O.O.
Page 9 z 22
Manufacturer of machinery and equipment, CNC machining service
Security signs:
1. Safety signs must be kept clean at all times and legible.
2. Immediately replace security signs that are missing or have become illegible.
3. The replaced parts which had the safety mark (s) should also be given a valid
mark.
4. Safety signs are available from an authorized distributor or in the sales / service
department of the factory.
Installation of safety signs:
1.
The place of installation should be degreased and wiped dry.
2.
Apply warning signs when the temperature is more than 10˚C (50˚F).
3.
Before removing the protective paper, determine the appropriate application
site.
4.
When tearing off the protective paper of the adhesive layer, apply a warning
sign and then smooth with protective paper.
To do before starting work
Before starting work:
1.
Inspect the wood chipper before each use. Check that the safety and pro-
pulsion system functions correctly. If not, the system should be repaired
before starting the chipper.
2.
Before starting work, it is necessary to make sure that all covers are
properly fastened (check tightness of screws).
3.
The machine should be placed on an even, hard, non-slippery surface with
extreme caution.
4.
Before commencing shredding, make sure that there are no bystanders or
animals near the machine.
5.
Before starting the engine on the tractor, check the attachment of the chip-
per.
6.
Wear a helmet or other headgear that covers the hair, safety glasses, ear
protectors, and protective clothing. The person operating the machine
should not wear a scarf, tie, too loose clothing (close-fitting clothing recom-
mended) and gloves intended for other work (e.g. welding leather).
7.
Damaged or illegible stickers must be replaced.