manualshive.com logo in svg

REMEHA Gas 120 ACE - 115, Руководство пользователя, Страница: 44 / 96

Поделиться
Скачать
REMEHA Gas 120 ACE - 115 Скачать руководство пользователя страница 44

8.8.3 

Modifying the domestic hot water set point temperatures

You can modify the "Comfort domestic hot water" and "Reduced domestic 

hot water" set point temperatures.

1. Select the 

 icon for the DHW zone. 

2. Select one of the following menus: 

Menu

Description

ComfortZoneDHWtemp

Only modify the "Comfort domestic hot water" set point tem­

perature

Zone configuration > Domestic Hot Water Setpoints

Modify the "Comfort domestic hot water" and "Reduced do­

mestic hot water" set point temperatures.

8.8.4 

Timer programming for domestic hot water

Activating timer programming mode

In order to use the timer programme, the timer programming (Scheduling) 

mode must be activated. This is activated for each zone individually.

1. Select the icon for the DHW 

 zone. 

2. Select Zone configuration > OperatingZoneMode > Scheduling.

Creating a timer programme for domestic hot water

A timer programme can be used to vary the domestic hot water 

temperature depending on activities during the day. This can be 

programmed for each day of the week.

1. Select the 

 icon for the DHW zone. 

2. Select Zone configuration > DHW Schedule. 

3. Select the programme to be modified.

The programmed activities for Sunday are displayed.

The last activity of the day remains active until the first activity of the 

following day.

4. Select the day to be modified.

5. Carry out the following actions according to your needs:

Modify the timings for programmed activities.

Add a new activity.

Delete a programmed activity (choose the activity "Delete").

Copy programmed daily activities to other days.

Modify temperatures linked to an activity.

Selecting a timer programme

In the Timer programming operating mode, three programs are available.

To select a timer programme:

1. Select the 

 icon for the DHW zone. 

2. Select Scheduling.

3. Select the desired timer programme.

Off

Off

Off

Fig.55

DHW1: DHW Schedule

Zone setup...

Zo...

14 : 23

Sunday

6:00

Comfort

55.0°C

       Edit schedule entry

6:00

Comfort

55.0°C

Add time and Activity

Copy to other day

Set activity temperatures 

MW-2000750-2

Off

8  Operation

44

MID _HMI T-control - Gas 120 ACE

7717201 - v03 - 25062019

Содержание Gas 120 ACE - 115

































































































Отзывы:

Нет отзывов