background image

11  Warranty

11.1  General

We would like to thank you for buying one of our appliances and for your 

trust in our product.
In order to ensure continued safe and efficient operation we recommend 

that the product is regularly inspected and maintained.
Your installer and our service department can assist with this.

11.2  Terms of warranty

The following provisions do not affect the application, in favour of the buy­

er, of the legal provisions with regard to hidden defects that are applicable 

in the buyer's country.
This appliance comes with a warranty that covers all manufacturing faults; 

the warranty period will commence on the date of purchase stated on the 

installer's invoice.
The warranty period is stated in our price list.
As a manufacturer, we can by no means be held liable if the appliance is 

used incorrectly, is poorly maintained or not maintained at all, or is not in­

stalled correctly (it is your responsibility to ensure that installation is carried 

out by a qualified installer).
In particular, we cannot be held liable for material damage, intangible los­

ses or physical injury resulting from an installation that does not comply 

with:

Legal or regulatory requirements or provisions laid down by the local au­

thorities,

National or local regulations and special provisions relating to the instal­

lation,

Our manuals and installation instructions, in particular in terms of regular 

maintenance of the appliances,

Our warranty is limited to the replacement or repair of the parts found to 

be defective by our technical services team, excluding labour, transfer and 

transport costs.
Our warranty does not cover replacement or repair costs for parts that may 

become defective due to normal wear, incorrect usage, the intervention of 

unqualified third parties, inadequate or insufficient supervision or mainte­

nance, a mains supply that is not appropriate or the use of unsuitable or 

poor quality fuel.
Smaller parts, such as motors, pumps, electrical valves etc., are guaran­

teed only if these parts have never been dismantled.
The rights established in European Directive 99/44/EEC, implemented by 

legal decree No. 24 of 2 February 2002 and published in Official Journal 

No. 57 of 8 March 2002, remain in force.

11 Warranty

7626247 - v03 - 29042016

EL 110 SL

33

Содержание EL 110 SL





































Отзывы: