8 .
9 .
Press the * key on the MASTER
radio keyboard. The display will flash
PROG
signifying that the radio is
ready to download its program to the
CLONE.
Press the
FCN
key on the MASTER
radio keyboard. The program in the
MASTER will then be downloaded
to the CLONE. The CLONE will
automatically send back the program
to the MASTER to verify a successful
cloning.
10. If the download was successful, the
MASTER’s display will resume
flashing
PROG.
A.
To clone the other Channel
Group, power down both radios
and go to Step 3, changing the
Channel Group as required.
B.
If finished cloning, power down
the CLONE and disconnect the
cloning cable. Normal radio
operation will occur on the
CLONE’s next power up.
11. If the download was not successful,
the MASTER will display
FAIL
and
multiple beeps will follow. Failure of
downloading can be due to:
A. Improper connection
B.
Failure to power up CLONE
C .
CLONE set in the programming
mode
NOTE:
To stop the FAIL mode,
press
CLR,
power down both radios
and try again, starting at step 1 on
page 23.
24
Содержание EPI 3101A
Страница 1: ......
