5.
Press the FCN key. The display will
show the transmit frequency in MHz.
6.
Press the FCN key. The display will
show the transmit Tone Code Guard
or Digital Code Guard. (Inverted
Digital Code Guard illustrated.)
7.
Press the FCN key. The display will
loop back to the entry point and
display the reviewed channel.
I
8.
Press PRI to increment the channel
number by 1, or press CLR and then
press the digit key(s) of the next
channel to be reviewed. The FCN
key can then be used to review the
frequencies and Code Guard of this
next channel.
9.
To leave the programming mode,
power the unit down by rotating the
volume knob counter clockwise to
the OFF position. Normal operation
will occur on the next power up.
TO PROGRAM GENERAL RADIO PERFORMANCE VARIABLES
(CH 0) OF THE SELECTED CHANNEL GROUP:
A.
To Set the ID Number
P R O G
I D
1.
After selecting the desired Channel
Group (01 or 02) and entering the
program mode (see page 9), the
display will show PROG Ch 0.
2.
Press the FCN key.
3.
The display will be blank or will show
a one to a seven digit ID number.
This ID number is intended as an
electronic serial number for radio
system management purposes.
EPI 3101A User’s Manual
1 3
Содержание EPI 3101A
Страница 1: ......
