RELM EPI 3101A, Руководство пользователя

Страница: 13 / 30

1. After entering the Program Mode, the
display will show
PROG Ch 0.
2. Press the
FCN
key. The display will show
length).
an ID number (up to seven digits in
TX
3. Press the
FCN
key. The display will show
the Transmit Timeout Timer length in
seconds.
4. Press the
FCN
key. The display will show
the Scan Delay Time in seconds.
5. Press the
FCN
key. The display will show
the five individual Functions of Group One
that are enabled or disabled.
6. Press the
FCN
key. The display will show
the five individual Functions of Group Two
that are enabled or disabled.
7. Press the
FCN
key. The display will loop
back to the Channel 0 entry point and show
POINT
.
T O R E V I E W F R E Q U E N C I E S A N D C O D E G U A R D F O R A N
INDIVIDUAL CHANNEL IN THE SELECTED CHANNEL GROUP:
R X C G
1
1. After entering the program mode,
the display will show
PROG Ch 0.
2. Press
CLR
and then press the digit
key(s) of the channel that needs to
be reviewed. The display will show
the channel to be reviewed.
3. Press the
FCN
key. The display will
show the receive frequency in MHz.
4 . Press the
FCN
key. The display will
show the receive Tone Code Guard
or Digital Code Guard (the value 0.0
denotes carrier squelch). Digital
Code Guard will be a three digit
number preceded by a
d
in the
display.
DIGITAL CODE
1 2