Reliance electric MinPak Plus, Инструкция по эксплуатации

Страница: 19 / 55

18
(% # $ ' #""'#%&
Make sure all wires are connected.
#'#% %#("
- It may be necessary
to make a check of the drive motor to assure that no
damaging grounds- other than earth ground - exist
within the motor.
Although a megger may be used for this
test, if one is used, all conductors between the drive
motor and the MinPak Pluscontroller are to be disĆ
connected and moved aside. !%&
)# ' " (& ! '# ' #"'%# %&
%('&
'$ - Attach one lead from the ohmmeter to the moĆ
tor frame to make a simple resistance check.
'$ - Touch the test probe to each of the two power,
two thermostat, and two field leads to the motor.
If the reading to ground on any terminal is
&& '"
100,000 ohms, a ground condition exists.
'$ - If a ground condition exists, inspect the motor
thoroughly for internal shorts.
'$ - When the grounding condition iscorrected,
reconnectthe conductorsfrom the MinPak PluscontrolĆ
ler.
#*% " (&'!"'&
- Once all the preĆ
liminary powerĆoff static adjustments have been perĆ
formed with acceptable results, the aĆc line power is to
(% % & " (& "'%" +#('