Reliable UberLight 8000, Инструкция по эксплуатации

Страница: 6 / 20

04
cONNEctING tHE 8000S tO 110V PLUG (USE 15A 125V 3 bLADE PLUG)
1. Connect the green lead to the ground blade
2. Connect the black lead to the line blade (usually brass looking)
3. Connect the white lead to the neutral blade (usually silver looking)
INStALLAtION INStRUctIONS FOR 8000c
tHE 8000c cAN bE USED WItH OUR WItHOUt tHE SUPPLIED cLAMP
If you would like to use it without the clamp, unscrew the 4 screws that attach the
clamp, and place the base where you would like to mount the light. Using 4 longer
screws (not supplied), attach the base to the surface.
To use the 8000C with the provided clamp, unwind the clamp to the desired width,
place over a hard surface and tighten so it is secure.
SAVE tHESE INStRUctIONS IN A SAFE
PLAcE FOR FUtURE REFERENcE