Reliable ARIA 100SP, Инструкция по эксплуатации

Страница: 14 / 56

Yoke- Arrange the shoulders around the slanted left side of the board. Let the col-
lar hang off the edge. Press.
Cuffs- Place the cuffs and plackets around the edges of the ironing cushion.
Arrange any pleats. Press.
Sleeves- Place the garment to the left side of the press with the collar towards
you. Place the first sleeve on the ironing board with the curve of the garment
fitted to the slanted left side of the board (the second sleeve will lay in front of the
press off the board). Press. Remove the first sleeve and place the second sleeve
on the board. Press.
Body- Put the sleeves together and fold the shirt in half. Place it at the back of the
ironing board away from you, extending the sleeves behind the board on the right.
Bring the shirt front with the buttons forward first. With your right hand, hold
the collar so that the curved edge of the neck opening is flat against the ironing
board. Do not release the collar until you have lowered the pressing plate. Press.
Keep pulling the shirt forward until you have worked the whole way around.
Collar- Place the collar on the board, spray and press. Fold the collar in half, spray
then press.
Shirt Tail- Button the garment and place the shirt tail squarely on the ironing
board. Press. Hang the shirt on a hanger, or fold it. It is a good idea to let it cool
before folding. Use the ironing cushion to retouch any areas.
Hint: Use this same procedure on other fitted garments such as blouses, fitted
shirts, jackets, etc.
T-SHIRT
Place t-shirt flat on the ironing board. Depending on the shape, begin with the
sleeves.
Note: If your t-shirt has rhinestones or an application on it, press with the deco-
rated side face down on the board or turn it inside out.
PLEATED SKIRT
11