Reliable 2000FR, Инструкция по эксплуатации

Страница: 4 / 12

D. LED Light Function
1. Press the speed button (as labeled "C" above) for 3 seconds to turn
on the LED. Hold for another 3 seconds to turn off.
** Before cutting, connect the battery to the machine and sharpen the knife-edge
by pushing the spring loaded projection-grinding switch several times. **
E. Cutting
1. Ensure the power is in the off "O" position.
2. Pull the knife protector to the appropriate position, start the cutting
knife and adjust it to the desired speed.
F. Charging the battery
1. Insert the charger into the appropriate power socket.
2. A green light will show that the charger is powered and ready.
3. Insert the battery into the designated socket.
4. 120 minutes of charging time is required for a full charge.
5. Unplug when complete.
G. Replacing the Blade ** remove the battery first **
1. Remove the 3 screws on the cutting shield and remove the shield
(Figure 3).
2. Align the positioning holes on the blade with the positioning holes
on the back cushion
(Figure 4).
3. Insert the inner hexagonal wrench into the blade and the hole of the
rack plate, lock the blade, then insert the butterfly wrench into the
locking nut, loosen the nut counterclockwise and remove the old
blade
(Figure 5 & 6).
4. Install the new blade. Please note that the blade positioning groove
matches the blade positioning tip.
�- .
�
�
<'
Figure 3 .
Figure 4 .
Figure 5 .
Figure 6 .
3