REL Acoustics G1 Mk II, Руководство по эксплуатации

Страница: 17 / 31

• For differential (i.e. fully balanced) amplifiers using one REL, simply use the standard connecting scheme
with the exception of NOT connecting the black wire to a negative speaker terminal. Instead, it should
first be allowed to “float” or hang down without connection to ANY terminal. Should hum occur using this
method, please try connecting to an unused RCA connector on the rear of a preamp or amplifier. Please
contact your dealer should there be any questions concerning this or any other hookup procedure.
NOTE: G1 Mk II models are equipped with internal circuitry to allow connection to many Class-D (digital)
amplifiers. Warning: Do NOT connect the Black wire to the main Class D power amplifier’s speaker ground
terminal. Some Class D amplifiers produce positive voltage at the amplifier’s speaker ground terminal
(black) and connecting the REL’s ground will produce an undesirable shorting to ground. If connecting to
a Class-D amplifier, follow the above connection procedure for differential amplifiers.
16
Differential (i.e. Fully Balanced)