12.
Setup
Connecting Via Line In
Any device that has a headphone or Line out port can connect to the Soundbar via
the 3.5mm ‘Line In’ port.
Connect a 3.5mm AUX cable to the ‘LINE IN’ port
E
1
on the back of the Soundbar.
Connect the other end of the AUX cable to the device’s ‘Headphone’
D
2
or
‘Line Out’ port.
E
1
2
If you are connecting a smart phone, make sure the phone’s volume has been
set to maximum.
Setting Up The Subwoofer
The subwoofer will automatically connect to the soundbar once they are both turned
on. Connect the 18V/2A mains adaptor to a suitable main outlet and the other end to
the ‘DC In’
A
3
on the back of the subwoofer. Turn on the subwoofer with power on
switch
A
4
followed by pressing and holding the power button on the side of the
soundbar
A
5
until the soundbar turns on. With in a few seconds the subwoofer
will automatically connect ready to use.
If the subwoofer does not connect, turn both units of, wait a moment then
turn them on in the order listed above.
