20.
Mounting
Drill the holes carefully to the depth marked by the tape.
Insert the wall plugs and tap them into place until they are flush with the wall with
the back of the screwdriver. Fix the screws in place with a cross head screwdriver
leaving a couple of millimetres space between the wall and the screw head so the
bracket can hook on to them.
Connect the power cable and required audio cable inputs you want to use to the
back of the soundbar. Finally line up the center of the crosses on the brackets to the
fitted screws on the wall. Slot the bracket over the screw heads and lower the
soundbar into place to finalise mounting it to the wall.
Connect any cable that require connecting to devices. Once done, secure all cables to
prevent snagging and to tidy up the installed area.
Clean up the area of brick dust to prevent stains and/or damage to equipment
and surrounding area.
