S-AGR08gb02
05/15 - 3
Page 2 of 4
2
Safety Regulations
2.3 Instructions
Persons who work with the spraying device must be instructed about dangers before beginning
their activities.
This instruction must be repeated and documented at least once per year.
2.4
Work stations
Danger!
Danger of fire and explosion!
• Smoking and open flames are strictly prohibited in areas prone to
fire and explosion.
• No accumulations of coating materials must be allowed to collect in
spray booths, on spraying stands, or anywhere in the entire work
area.
• Access doors to the spray booths must remain closed during
spraying.
• Sources of ignition must be avoided.
2.5
Cleaning
Danger!
Danger of fire and explosion!
Accumulations of coating materials must be removed. The following
must be cleaned regularly:
• Workpiece fixtures
• Suction devices
• Leakage mist separators and their immediate vicinity
Technical ventilation must be active during cleaning work.
Use only electrically conductive containers for the cleaning fluids. Ad
-
ditionally, these containers must be earthed.
Use only solvents with a flashpoint that is at least 5°C higher than the
surrounding temperature. When cleaning the guns, wear suitable pro-
tective clothing, such as gloves, safety goggles, etc.
2.6
Requirement for the entering of spray booth
Warning!
Danger of inhaling substances hazardous to your health!
During the spraying operation, no persons are permitted to remain in
the spray booth.
The concentration of solvent in the air must be under the limit that is
harmful to health. If appropriate, wear suitable protective breathing
equipment when entering the spray booth.
!
!
!
