S-AGR08gb02
05/15 - 3
Page 1 of 4
2
Safety Regulations
!
Attention!
2.1
Explanation of symbols and special directions
2.1.1 Symbol of working safety
This symbol found on all work safety notes in these instructions, if
ignored, may cause hazards. The instructions must be particularly
observed by the users of the machine. Inform other users of potential
hazards that can occur when using the machine. Besides the recom-
mendations in this BA to the general safety and accident prevention
and safety regulations.
2.1.2 Directions for “Attention“
This warning is shown at points where special attention needs to be
given in order that guidelines, regulations, special directions, and
proper work procedures are observed and to prevent damage or de-
struction of the machine and/or other parts of the plant.
2.2
Basic safety instructions
The spray system with the automatic spray gun AGR-08 must only be operated by trained person-
nel.
A warning sign must be posted in a conspicuous place close to the spraying area. This warning
sign should contain the most important functions and safety measures that users must observe.
The dangers present when cleaning spray guns must be clearly highlighted.
The start-up of the system by the user may only be performed after an initial test by an authorised
technician prior to the transfer of risk to the user.
Table of Contents
2.1
Explanation of symbols and special directions ..................................................................1
2.1.1
Symbol of working safety ...................................................................................................1
2.1.2
Directions for “Attention“ ....................................................................................................1
2.2
Basic safety instructions ....................................................................................................1
2.3 Instructions.........................................................................................................................2
2.4
Work stations .....................................................................................................................2
2.5
Cleaning .............................................................................................................................2
2.6
Requirement for the entering of spray booth .....................................................................2
2.7
Explosive areas (DIN EN 12215) .......................................................................................3
