15
Description of the control elements
Control panel on base plate –
for all mezzos with mains operation only
Power switch ON / OFF
Only after connecting mezzo successfully to the power supply, the device
can be switched ON or OFF using the toggle switch. After switching ON,
the green power LED above the toggle switch lights up.
When the device will be turned OFF, the latest used settings are saved
automatically.
When switching ON again, the latest used settings are reactivated.
Attention!:
If the reading table is not lit up after switching ON the device, please
check if the LED-light is ON (please see next paragraph).
Light adjustment (50% / OFF / 100%)
Press the toggle switch to adjust the LED lighting accordingly:
●
I
=
LED-light min. 50%
●
0
=
LED-light OFF
●
II
=
LED-light max. 100%
General note on using the LED-light
While using the device, it could be helpful to switch OFF or reduce the LED-light of
the device, for example, when the light in the room or from outside changes (sun-
light).
ON
OFF
0
II
I
0
II
I
ON
OFF
