Reid T DAVIT, Руководство по сборке и эксплуатации

Страница: 6 / 36

Correct Operation
Disclaimer
REID lifting sockets & extensions have been
designed, developed and tested for safe use
with REID equipment and form a key part of
the integrity of the total system
All sockets have a maximum moment based
on the maximum reach setting of the Davit,
and the socket installation and verification
tests performed
If non-standard, third-party sockets are used,
REID Lifting’s Declaration of Conformity &
Incorporation and warranty for the products is
no longer valid and the system becomes the
responsibility of the client
Warning
The equipment should not be used outside
of its limitations, or for any purpose other than
that for which it is intended
Do not lift or transport loads while personnel
are in the danger zone
Do not allow personnel to pass under a
suspended load
Never leave a suspended load unattended
Be aware of hazards when setting up/folding
down, such as trapping fingers in rotating
parts
Be aware of any adverse weather conditions
such as strong or gusty winds which could
impose additional horizontal loads and affect
the stability of the structure. Stop using if
weather is impacting on lifting, and either
disassemble the system or tie it to a rigid
structure to ensure it can’t overturn
Don’t allow the load to hit the system
Fall Protection
Fall arrest:
This product contains a safety anchor
point intended to protect the operator in the
event of a fall only.
When being used for fall arrest, the operator must
be equipped with a full body harness and a shock
absorber that complies with the relevant national
standards and regulation and that limits the
Maximum Allowed Force (M.A.F.) To 8kn.
Only one person should be attached to the Davit
in accordance with the notified Working Load
Limit (WLL). Each lift must be properly planned,
and all weights clearly known along with the
WLLs and constraints of all fall arrest system
components.
For custom designed davits please contact your
supplier for appropriate rating and capabilities.