Reid T DAVIT, Руководство по сборке и эксплуатации

Страница: 7 / 36

7
T
DAVIT
Additional Notes for Correct Operation
Ensure suitable and appropriately rated
winches and connection plates are used for all
applications
The fall arrest device must only be attached to
the indicated lifting point on the column.
Never walk away from the structure whilst
connected to the equipment (either by winch
or fall arrest block)
When using the davit as a fall arrest anchor,
ensure there is adequate fall clearance when
working at height.
Always consider the potential effects of
sharp edges, chemical reagents, electrical
conductivity, cutting, abrasion, climatic
exposure on the fall protection lifelines,
and the effect of offset forces as a result of
pendulum falls
Where regulations require, each installation
must be approved by a qualified person.
Warning
When using the Davit in conjunction with any
other manufacturer’s fall protection products,
it is essential to read the instructions for
those products to check their suitability and
restrictions for use
REID Lifting does not recommend that the
davit is used for personnel and goods lifting at
the same time
It is essential for safety that the product is
withdrawn from use immediately and not be
used again until confirmed in writing by a
competent person should,
1. Any doubt arises about its condition for
safe use or;
2.It has been used to arrest a fall