REID LIFTING PORTABASE PBCB00001 Скачать руководство пользователя страница 9

9

PORTA

BASE

    The substrate of the structure on which the 

product is placed must be able to sustain the 
loads specified for the device in all orientations 
permitted, including a safety factor of at least 2

    Never exceed the number of allowable users

    Never adjust the product whilst a person is 

attached to it

    Only use designated anchor points for the 

attachment of fall protection devices

    Ensure that any fall protection system 

components being used are compatible and 
meet the requirements of applicable standards

    When using this product ensure that there is a 

rescue plan prior to starting work and ensure 
that users are trained in the correct execution 
of the plan and have all necessary rescue 
equipment to hand

    Where required by regulation, each installation 

must be approved by a qualified person 

    Always wear appropriate PPE when installing, 

setting up, dismantling and using this 
equipment

    Misuse of this product could result in serious 

injury or death

Warning

    For fall protection applications the maximum 

user weight is 150kg or the weight allowed by 
the lowest rated piece of equipment in the fall 
arrest system

    Ensure that you have read and understood the 

maximum force tables for each anchor point on 
the corresponding davit selected to be used 
with the Porta Base. This varies (is reduced) as 
the Davit radius increases

    When using for fall protection, only use one 

fall arrest device with each pulley/sheave and 
make sure they never cross paths with each 
other 

    When using the product in conjunction with 

another manufacturers fall protection products, 
ensure that you have read the instructions for 
use of those products to ensure their suitability 
and any restrictions for use. Only use approved 
brackets for the connection of winches and self 
retracting lifelines

    It is essential for safety that the product is 

withdrawn from use immediately and not be 
used again until confirmed in writing by a 
competent person should; 

            

 

1. Any doubt arises about its condition for 
safe use or; 

            

 

2. It has been used to arrest a fall 

            

 

3. It has been used for any other purpose, 
other than as a component of a personal 
fall protection system

IRATA [International Rope Access Trade 

Association]

This product is suitable for rope access and 
has been tested to 15kN static load as per test 
requirements of IRATA international code of 
practice (ICOP).

Содержание PORTABASE PBCB00001





































Отзывы: