Reichert TONO-PEN VET, Руководство пользователя

Страница: 19 / 21

Page 0
Guidance and manufacturer’s declaration – electromagnetic immunity - Part
I
The TONO-PEN VET is intended for use in the electromagnetic environment specified below. The customer or the
user of the TONO-PEN VET should assure that it is used in such an environment.
Immunity test
EN 60601
test level
Compliance level
Electromagnetic
environment -
guidance
Electrostatic discharge
(ESD)
EN 61000-4-
±6 kV contact
±8 kV air
±6 kV contact
±8 kV air
Floors should be wood,
concrete, or ceramic tile.
If floors are covered with
synthetic material, the
relative humidity should
be at least 30 %.
Power frequency (50/60
Hz) magnetic field
EN 61000-4-8
3 A/m 3 A/m
Power frequency
magnetic fields should
be at levels characteristic
of a typical location in
a typical commercial or
hospital environment.
Guidance and manufacturer’s declaration – electromagnetic emissions
The TONO-PEN VET is intended for use in the electromagnetic environment specified below. The customer or the
user of the TONO-PEN VET should assure that it is used in such an environment.
Emissions Compliance
Electromagnetic environment -
guidance
RF emissions
CISPR 11
Group 1
The TONO-PEN VET uses RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
The TONO-PEN VET is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings for
domestic purpose.
Harmonic emissions
EN 61000-3-
N/A
Voltage fluctuations
EN 61000-3-3
N/A
Guidance & Manufacturer’s Declaration