Reich Kupplungen MMS-T W Series, Руководство по эксплуатации

Страница: 17 / 52

Description
17
Components
Coupling hubs
The coupling has two coupling hubs. The coupling hubs usually consist of cast iron.
They are placed on the shaft of the driven/driving machine and fixed in position by a
taper bush. The coupling hub is equipped with claws. These claws are the
counterpart to the flexible elements.
Taper bush
The taper bush is a connection element with a conical basic form and a longitudinal
slot. It acts as a form-fitting shaft-hub connection to connect the coupling hub with
the shaft of the driven/driving machine. The taper bush is tensioned into the threaded
parts by screwing in the bolts supplied. This means the conical surfaces are pressed
against each other. The coupling is held on the shaft by means of this press force.
Torque transmission occurs via the form-fitting key connection.