Reich Kupplungen MMS-T W Series, Руководство по эксплуатации

Страница: 12 / 52

Safety
12
Danger to life due to improper transportation and handling of the coupling
If the coupling or its components are inadequately supported during transport,
assembly or disassembly, there is a risk of crushing injuries in the event of the
coupling or its components falling down.
Exclusively use undamaged lifting and lashing gear which is suitable for the load.
Secure the coupling and its components during transport, assembly or
disassembly to prevent them from falling down.
Do not stand under suspended loads.
Wear the personal protective equipment specified by the owner.
Avoiding risks of injury due to entanglement
Perform all work required on the coupling only when the coupling is stationary.
Switch off the driving machine prior to all work on the coupling.
Secure the driving machine to prevent reactivation.
Exclusively operate the coupling with a mounted and functional protection device.
Affix a label warning of the hazard of entanglement on the protection device.
Avoiding risks of burns from hot surfaces
The surface of the coupling can become hot during operation.
Do not touch hot surfaces.
Allow the coupling to cool to hand temperature prior to maintenance work.
If necessary, check the surface temperature with an infrared thermometer.
Wear the personal protective equipment specified by the owner.
Avoiding risks of poisoning
There is a risk of poisoning when working with solvents or preservatives.
Wear the personal protective equipment specified by the owner.
Observe and follow the instructions contained in the safety data sheet for the
solvent or preservative being used.
Make sure that the workplace is adequately ventilated.