REHM FOCUS.ARC P 250, Руководство по эксплуатации

Страница: 36 / 82

Function description
36
6. Submenus
Pressing the "Submenus" button [ BF12 ] accesses a selection list (drop down list)
for the existing submenu.
The following menus can be selected from this list:
1. MSG parameters
2. Language selection
3. Function job memory (program)
4. Setup (Settings)
The submenus can be exited in 3 ways, with the return button [ BF18 ]:
1. One level back by acknowledging a setting
2. One level back by pressing the
"Back" button
3. Completely back to the main screen with the button " Main menu "
( Rehm ).
6.1 MSG parameters
With the welding parameters, the user can individually set the most important
parameters for welding, such as: Gas pre-flow time, creep, etc.
Some welding parameters are only active when certain welding processes /
functions are selected.
6.1.1 Parameter settings
The selection and processing of the welding parameters is carried out for the
most part directly in the illustrated welding wave using the push and rotate
encoder
[Fig. 10].
The representation and setting options depend on the unit type and the
preselected welding process.
The cursor can be moved clockwise or counter clockwise. The main display
always shows the value and function of the cursor position.
6.1.2 Setting the MSG welding parameters
For processing, a parameter field is activated by rotating the rotary encoder] to
the adjustable value field [parameter field] in the screen display and activating
this field by pressing the encoder. The background colour of the field changes (is
highlighted).
If the parameter field is active, the set value appears as a large display at the top
center of the screen (Fig. 21). In addition, a bar display appears in the status
field,Figure which shows the set value in the permissible value range.
The welding parameters are described in detail below in the order according to
the MSG parameter curve [
BF13 ].