Rehau AWADUKT PP, Руководство по сборке

Страница: 17 / 20

EN
12. Insert the milling drill into the drill machine
and lock.
Warning: Risk of cut injuries from the
milling drill.
13. Insert Component 1 incl. drill machine into
Component 2 up to the adjusting screw
(distance approx. 9 cm) and secure on both
sides with a grub screw M6.
14. Turn the guide rollers anti-clockwise using
toggle screw. Insert the milling fixture into
the saddle outlet vertically and drill into the
main pipe during this process. Tighten the
toggle screws whilst the drill is running until
the guide rollers are free of clearance at the
saddle outlet.
Component 1
Component 2
17