Rehau 202484, Руководство по эксплуатации

Страница: 28 / 68

28
Processing at temperatures of under -10°C and over 45°C may
result in damage to the connection components, the tool and/or
people .
- Do not work below the minimum processing temperature of
10°C .
- At low temperatures (below 0°C), it is recommended that the
connecting components be pre-positioned in a warm envi-
ronment before processing .
6. By operating the pump with the foot or the hand . . .
7. . . . force compression sleeve up to the fitting.
Caution:
Do not touch moving parts (risk of trapping fingers)!
8. Return tool to starting position by pressing release lever.
9. Completely compressed compression sleeve connection.
5. Insert the joint fully into the clamping tool.
Caution:
Do not tilt. Tool must be applied over full surface and at right angles.