Regulus uREG, Руководство пользователя

Страница: 99 / 107

uREG User Manual
99
Table 16.2.2. Communication settings (Ethernet communication).
Setting designation and description Denomination Setting value
IP address element 1 (MSB):
IP address of Ethernet interface of uREG
120 IP address
element (1)
0 – 255
default 192
IP address element 2
121 IP address
element (2) 0 – 255
default 168
IP address element 3
122 IP address
element (3) 0 – 255
default 1
IP address element 4 (LSB)
123 IP address
element (4) 0 – 255
default 100
IP mask element 1 (MSB):
IP mask of Ethernet interface of uREG
124 IP mask
element (1)
0 – 255
default 255
IP mask element 2
125 IP mask
element (2) 0 – 255
default 255
IP mask element 3
126 IP mask
element (3) 0 – 255
default 255
IP mask element 4 (LSB)
127 IP mask
element (4)
0 – 255
default 0
IP gateway element 1 (MSB)
Router IP address
128 IP gateway
element (1) 0 – 255
default 192
IP gateway element 2
129 IP gateway
element (2)
0 – 255
default 168
IP gateway element 3
12A IP gateway
element (3) 0 – 255
default 1
IP gateway element 4 (LSB)
12B IP gateway
element (4) 0 – 255
default 1
IP port (uCZIPStd protocol) MSB
16-bit number of IP port of 2 x bytes (MSB|LSB)
for decimal definition, e.g. 15|162 = 0FA2h = 4002
12C Prot.uCZIPStd
Port MSB
0 – 255
default 15 = 0Fh
IP port (uCZIPStd protocol) LSB
12D Prot.uCZIPStd
Port LSB 0 – 255
default 162 = A2h
IP port (DNP-3 protocol) MSB
12E Prot.DNP-3
Port MSB
0 – 255
default 15
IP port (DNP-3 protocol) LSB
12F Prot.DNP-3
Port LSB 0 – 255
default 162
Transport layer
12G Transport
layer UDP- STD DNP3, TCP- STD DNP3,
UDP-STD | TCP-DNP3,
TCP-STD | UDP-DNP3,
UDP-STD | TCP-104,
TCP-STD | TCP-104,
TCP-104 | TCP-104,
UDP-STD MDNP3,
Modbus TCP | Modbus TCP,
Modbus TCP | DNP3,
UDP DNP3 | Master DNP3,
UDP DNP3 | Master Modbus
UDP DNP3 | TCP DNP3 SCADA,
TCP DNP3 | UDP DNP3 SCADA
Activation of public MAC address
Reserved setting
12H Public MAC
address
inactive, active
IEEE 1588 PTP
Mode during synchronization of clock by IEEE 1588 protocol,
In
Master option, one of uREG units become the synchronizer.
12I IEEE 1588
PTP slave, master
BTS interlock for TCP:
Used to activate interlock of telecontrol via ETH (in TCP protocol)
12J BTS interlock
for TCP
inactive BTS,
active BTS,
Port DISABLED
BTS interlock for UDP:
Used to activate interlock of telecontrol via ETH (in UDP protocol)
12K BTS interlock
for UDP
inactive BTS,
active BTS,
Port DISABLED
MSB – most significant byte.
LSB – least significant byte.