Regulus uREG, Руководство пользователя

Страница: 3 / 107

uREG User Manual
3
SAFETY RULES
Operating or tested electric equipment is connected to sources supplying electric energy.
Therefore, some parts of the equipment may expose dangerous voltage. Also, for a certain period of
time after disconnection, this voltage may continue to exist across some elements or equipment
terminals. Failure to follow warnings or use the equipment properly may pose a hazard of injuries
and/or cause damage to the equipment.
Proper and safe operation depends on proper transport and handling, appropriate storage, installation
and final inspection prior to start-up, proper functioning as well as careful maintenance and service.
Proper earthing of the equipment must be established.
Therefore, any work with the device and operation of the controller unit should be entrusted only to
qualified personnel.
QUALIFIED PERSONNEL means any person who:
- is authorized to install, commission and operate equipment and the associated system,
- is authorized to perform switching operations in substation bays in accordance with safety instructions,
- is trained in safe equipment operation in accordance with standards,
- is trained in OH&S and first aid.
CAUTION
The documentation of the uREG relay contains necessary instructions relating to installation, start-up
and operation of the equipment. However, it is not possible to mention all essential circumstances or
detailed information regarding all probable concepts in this particular document. In case of any doubt or
specific problem, please refrain from any action until an authorized confirmation is obtained. In this
case, please consult technical staff at REGULUS to obtain necessary explanations.