Regulus ACC30, Инструкция по установке и эксплуатации

Страница: 6 / 68

6 English
INITIAL ACTUATOR SETUP
Constant temperature actuator s are equipped with an innovative solution, which allows
initial setup of the controller in only three steps.
When you connect the actuator to the power supply for the first time, the software version
is shown. Next, the first step appears on the screen.
STEP 1 - LANGUAGE SELECTION
Using buttons and you select the required
language.
Press the button to confirm the selected language.
After selecting the language, the actuator requires
confirmation of the selection by pressing the
button .
If you accidentally selected the wrong language, go
back to reset the language by pressing button .
STEP 2 - HYDRAULIC VARIANT SELECTION
Next, you select a hydraulic variant for the actuator
function. Move between variants by means of
buttons and .
Confirm the selected variant by pressing the
button .
After you selected the variant , the actuator re quires
confirmation of the selection by pressing the
button .
If you accidentally selected the wrong variant , go
back to reset the variant by pressing button .
Selected hydraulic variant can be later changed in service parameter
S1.1.