Regulus ACC30, Инструкция по установке и эксплуатации

Страница: 25 / 68

English 25
Each project with constant temperature actuator needs to be based
exclusively on customer design and calculations and needs to be in
compliance with valid rules and regulations. Pictures, diagrams and text in
this manual are intended solely as an example and the manufacturer does
not accept any responsibility for them. If you use content of this manual as
a base for your project, then you carry also full responsibility for it.
Responsibility of publisher for unprofessional, wrong and false information
and consecutive damage are explicitly excluded. We retain the right for
technical errors, mistakes, changes and corrections without prior notice.
Installation of control devices should be done by an expert with suitable qualifications or by
an authorised organisation. Before you deal with the main wiring, make sure that the main
switch is switched off.
You have to follow the rules for low-voltage installations IEC 60364 and VDE 0100, valid
laws for prevention of accidents, valid laws for environmental protection and other national
regulations.
ACTUATOR ’S ELECTRIC CONNECTION
Install the actuator indoors in a dry place, where it is not exposed to any strong
electromag netic fields.
INSTALLATION MANUAL
ACTUATOR INSTALLATION