Regulus 18966, Инструкция по установке и эксплуатации

Страница: 11 / 12

FLASHING FREQUENCY
OF GREEN LEDS
CONTROL RECEIVING PWM SIGNAL
Not flashing Internal -
1 flash per second External NO
12 flashes per second External YES
WARNING:
LEDs may be turned by 90° or 180°, or mirrored, depending on the specific pump type.
When switched on, the pump runs at factory settings or the last setting. The display shows the
current pump performance.
Setting selection
To select your desired setting, press the button repeatedly until you find the setting you need (see
the table above). If you pass the desired setting, you have to go one more round until it appears
again. The order of modes corresponds to the table.
Error Display
DISPLAY CONTROL MODE
Seized pump
Too low power supply voltage
Electric fault
Pump Wiring
socket for power supply (A)
and signal transmission (B)
connector for power supply (A)
and signal transmission (B)
N (blue)
L (brown)
PE (yellow-green)
PWM GND (blue)
iPWM out (black)
PWM in (brown)