REGULA 7517A, Руководство пользователя

Страница: 5 / 32

5
INTRODUCTION
The User’s Guide is the main operational document to the magneto-optical device
Regula 7517A (hereinafter referred to as the “device”). The device is a part of the hardware
and software system for forensic examination of firearms and ammunition serial numbers
Regula 7517. As a part of the system the device is used together with the eddy-current
magnetographing device Regula 7517B and magnetizing equipment Regula 7517C.
The User’s Guide contains information concerning device and its components design,
principles of operation and specifications. The Guide also provides instructions on the correct
and safe use of the device (intended use, maintenance, routine repairs, storage and
transportation) and on its technical condition evaluation when deciding whether it is necessary
to send the system for repairs.
Description of the device software is given in a separate document.
Personnel operating the device are required to:
z
have higher or specialized technical education,
z
pass special training and get clearance to perform expert examination in the field of
trace evidence,
z
be an OS Windows user,
z
study techniques of authenticity verification of firearms and ammunition serial numbers
and the User’s Guide,
z
pass practical training on the use of equipment supplied,
z
pass training on safety measures observed when working with the system.
ATTENTION!
USB devices do not have dangerous voltage as they are powered by
a secondary power supply source — a PC USB-bus with nominal voltage 5 V.
However, the mains power source and PC peripherals (supplied optionally)
can have life hazardous nominal voltage ~ 220 V 50 Hz. To avoid electric
shock personnel are obliged to strictly observe the safety measures.
The device is classified as Class I Equipment (IEC 60950–1) with regard to
protection against electric shock.
The magnetic copying accessory set contains inflammable liquid (alcohol).
To ensure device proper operation it is strongly recommended not to
change software settings. The system should be operated, maintained,
repaired, stored and transported in conformity with paragraphs 2–6 of
this User’s Guide. Violation of these requirements will result in the loss of
the manufacturer’s warranty.