REGLOPLAS 150smart, Руководство по эксплуатации

Страница: 8 / 41

V 11/2014
4

General Safety Information Temperature Control Unit 90smart/150smart
guisher. The appropriate fire extinguisher must be provided by the opera-
tor, taking into account the equipment located in the room and the man-
datory safety regulations.
The temperature control unit may only be operated when all safety sys-
tems are completely installed and intact.
The temperature control unit must be protected against sprays and clean-
ing agents.
Before detaching connecting lines from the temperature control circuit,
first allow the temperature control unit to cool down, as a function of the
outlet temperature, and then switch it off. Check that the pump is no
longer running.
WARNING
Important - Danger of injury in the event of escaping water or oil!
Using This Documentation
This documentation contains important information for safe and economi-
cal operation and proper maintenance of the device.
Compliance with this documentation helps to avoid danger, minimise re-
pair costs and downtime, and increase the dependability and service life
of the device/system.
NOTE
The operating instructions should be kept near the corresponding de-
vice/system and always be accessible to operating and maintenance personnel.
Additional Documentation
The included documentation is completely correct for the basic versions
of devices. Components that do not belong to the basic hardware are
noted as extra equipment. The corresponding additional documents are
included with special versions of devices. Any additional documents sup-
plement and/or replace the descriptions contained in this documentation,
which are then either invalid or only conditionally valid.