4.2 Connect SkyGWO to a server PC
1. Securely fix PCI-E card on PCI-E or PCI bus of desktop PC via bracket
screw.
2.
As above figure, connect J1 (with red/yellow labels) with 5/12V 4 Pin
power connector of PC power supply. Please be careful on the
connection although the connector is fool-proofing. Wrong
connection will make PCI-E card being damaged! One site with red
round label on J1 needs to be connected to 5V (red wire) and the
other J1 site with yellow round label needs to be connected to 12V
(yellow wire).
Once PC power is on, red LED of PCI-E card will be solid on.
12V power is not used in practice.
3. As above figure, connect JP1 to 4 pin USB header of the server PC with the
supplied USB cable. Red wire of the USB cable needs to be connected to
VCC (5V) and black wire of the USB cable needs to be connected to GND.
Please pay attention to the VCC/GND indication near JP1 of PCI-E card.
If
the USB cable is not correctly connected, PCI-E card won
’t be found
by PC system and card might be damaged
. Below figure is PC
motherboard USB connector. There are usually 10 pins for USB connector,
Pin 9 and pin10 are not used and should be left open.
Содержание SkyGWO
