Regency Plateau™ Series Outdoor Gas Fireplace
25
INSTALLATION
OPTIONAL GLASS SURROUND INSTALLATION
1)
Remove metal fasteners from the corner brackets.
2)
Assemble the 4 pieces of the glass surround and fasten together with
4 corner top brackets and supplied nylon fasteners as shown below.
3)
Using a fl at screwdriver, secure 4 top corner brackets with nylon
fasteners in each corner, bracket should be fl ush with the top of glass
as shown below.
6)
Secure bottom corner brackets with nylon fasteners in each corner.
Glass should be raised up 3/4" in bracket as shown below.
5)
Use supplied spacer tool to determine where the bottom bracket should
be place and secured.
4)
After the 4 top bracket are installed -fl ip over and place on a soft surface.
Install the 4 bottom brackets.
7)
Place assembled glass surround on table top - ensure glass is centered
on the table top. Once in correct position, lift up one end, apply double
sided tape that has been cut to size, to the bottom of the brackets.
Repeat process on other end. Press down fi rmly from to secure glass
surround in position. Use care not to scratch surfaces.
3/4"
Insert nylon fastener
here.
Spacer tool
Bottom Bracket
Top Bracket
Nylon fasteners
Nylon fasteners
