Regency Plateau™ Series Outdoor Gas Fireplace
13
INSTALLATION
1)
Remove end panel (end with the ON/OFF switch). Panels are held in place
by magnets. Place panel on a soft clean surface.
2)
Remove long side panel (left panel if you are facing end with ON/OFF
switch) to access the 3/8" fi tting to the gas control.
3)
Connect gas line..
GAS CONNECTION
4)
Check all gas connections (both valve train & propane tank or NG
source) under normal operating pressure, for leaks, with soapy water.
NOTE:
If soap bubbles, this would indicate a gas leak.
5)
Reverse steps 1 & 2.
Gas connection
@ unit