Regency MANSFIELD L850B ST, Инструкция для владельца и по установке

Страница: 23 / 40

Mansfield L850B ST Woodfire
23
installation
OPTIONAL OUTSIDE AIR KIT INSTALLATION
L850 Cascade
12.12.16
1
919-479
OUTSIDE AIR KIT INSTALLATION
When installing the outside air kit please ensure your pedestal base the unit
sits on is hollow in the centre. The outside adapter attaches to the bottom of
the unit. It is recommended not to down-size the outside air ducting.
1. Evaluate your base frame. Ensure there is adequate space to allow the
hook up of the adapter beneath the unit.
2. Gently lay the unit on its back to access the bottom. Remove the cover plate
located on the bottom of the unit accessing the primary air control.
Remove screws
and Cover Plate
3. Install the adapter ensuring it is centred on the primary air opening.
Secure in place with the provided screws.
NOTE: The larger diameter end requires to be sitting below the unit. Insert
adapter with smaller diameter end.
Large Diameter End to be Below Unit
View with Cover Plate removed and unit adapter installed.
4. Stretch the flex out to the distance required. Attach the flex to the
large diameter part that is protruding below the bottom of the unit.
Use the screws provided.
5. Cut a hole on your pre-determined outside wall to allow the fresh air hood
to be installed. Install and secure the fresh air hood. Caulk around the
flange to ensure tight seal against exterior of home. Join the flex from
the unit adapter to the fresh air hood on the inside of the wall