Regency I43-LPG1, Владельцы и установка

Страница: 17 / 28

17
Regency I43-1 ULTIMATE Gas Inbuilt Fireplace
OPERATING INSTRUCTIONS
COPY OF THE LIGHTING PLATE INSTRUCTIONS
A T
EFORE LIGHTING
HAT TO O IF YOU S ELL GAS
I
F
I
C U
N I
F
I
CAUTION H
S
ARNING I
I
R
F
T
T
CAN1 1 ANSI 1 A AG 1
N N S 1
FOR YOUR SAFETY
REA EFORE LIGHTING
LIGHTING INSTRUCTIONS
2) Wait five (5) minutes to clear out any gas. If you
then smell gas STOP! follow “B” in the safety
information above on this label. If you don’t
smell gas, go to the next step.
3) Turn knob on gas control counterclockwise
to “PILOT”.
4) Push in control knob all the way and hold in.
Immediately push black button on spark igniter
until pilot lights. Continue to hold the control
knob in for about 1/2 minute after the pilot is lit.
Release knob and it will pop back up. Pilot should
remain lit. If it goes out, repeat steps 3) and 4).
If knob does not pop up when released, stop and
immediately call your service technician or gas
supplier.
If the pilot will not stay lit after several tries, turn
the gas control knob to “OFF” and call your
service technician or gas supplier.
5) Turn gas control knob counterclockwise to
“ON”.
6) Use rocker switch to operate main burner.
TO TURN OFF GAS APPLIANCE
STOP! Read the safety information above on this
label.
1) Push in gas control knob slightly and turn clock-
wise to “OFF”. Knob cannot be turned from
“PILOT” to “OFF” unless knob is pushed in
slightly. Do not force.
1) Push in the gas control knob slightly and turn
clockwise to “OFF”. Do not force.
2) Turn off all electric power to the appliance if
service is to be performed.
DO NOT REMOVE THIS
INSTRUCTION PLATE
Made in Canada
908-099a