City Series CB60E | 7
FRAMING DIMENSIONS CB60E (3-SIDED)
NOTE: Framing may be constructed of combustible material (ie. 2 x 4)and does not require steel studs.
Framing
Dimensions
Description
CB60E
A
Framing Height
41-1/4" (1 048 mm)
B
Framing Width
71-1/4" (1810 mm)
C*
Framing Depth
20-5/16" (516 mm)
D
Minimum Height to Combustibles
81-1/4" (2038 mm)
G
Vent Centerline Height
58-3/16" (1478 mm)
**
Gas Connection Opening Height
See gas connection location in this manual
**
Gas Connection Height
See gas connection location in this manual
**
Gas Connection Inset-Centre Opening
See gas connection location in this manual
* Not in diagram below
** See manual for alternate Gas/ Electrical connection options
Note: A combined minimum of
180 square inches of open area
is required for the convection air
outlet to cool the enclosure. En-
sure clearances for Convection Air
Outlets are met.
See clearances CB60E in this man-
ual as there are different methods
as to how this can be achieved.
Note: This appliance must be
installed on a solid surface
such as a plywood floor
which must be the full width
and depth of the appliance.
Ensure that the wood base that the appliance will sit on is strong enough to support the full weight of this appliance.
The overall weight of this appliance is 460 pounds (shipping weight).
Note: Unit must be installed onto a solid
backwall - do not install directly onto studs.
*C
Note : The framing depth does not take into
account drywall/wood or similar materials
against the back wall. The framing depth will
need to change based on the thickness of the
material (example: 20-5/16 framing depth +
1/2 drywall = 20 13/16")
