background image

8

Regency Horizon™ HZ40E-2 Gas Fireplace

INSTALLATION

11)

     U n d e r   n o   c i r c u m s t a n c e   s h o u l d   t h i s 

appliance be modified.  Parts that have 
to be removed for servicing should be 
replaced prior to operating this appliance. 
    

12)

 Installation and any repairs to this appliance 

should be done by a qualifi ed service person. 
A professional service person should be called 
to inspect this appliance annually. Make it a 
practice to have all of your gas appliances 
checked annually.

13)

 Do not slam shut or strike the glass door.

14)

 Under no circumstances should any solid fuels 

(wood, paper, cardboard, coal, etc.) be used in 
this appliance.

15)

 The appliance area must be kept clear and free 

of combustible materials, (gases and other fl am-
mable vapours and liquids).

Emissions from burning  wood or gas could 
contain chemicals known to the State of 
California to  cause cancer, birth defects or 
other reproductive harm.

IMPORTANT MESSAGE  

SAVE THESE 

INSTRUCTIONS

The Gas Fireplace must be installed in accordance 
with these instructions. Carefully read all the 
instructions in this manual fi rst. Consult the "authority 
having jurisdiction" to determine the need for a permit 
prior to starting the installation. It is the responsibility 
of the installer to ensure this fi replace is installed 
in compliance with manufacturers instructions and 
all applicable codes.

BEFORE YOU  START

Safe installation and operation of this appliance 
requires common sense, however, we are required 
by the Canadian Safety Standards and ANSI 
Standards to make you aware of the following:

CLOTHING OR OTHER FLAMMABLE 
MATERIAL SHOULD NOT BE PLACED 
ON OR NEAR THE APPLIANCE.

   

CHILDREN AND ADULTS SHOULD BE 
ALERTED TO THE HAZARDS OF HIGH 
SURFACE TEMPERATURES,  ESPE-
CIALLY THE FIREPLACE GLASS, AND 
SHOULD STAY AWAY TO AVOID BURNS 
OR CLOTHING IGNITION.  

GENERAL SAFETY 

INFORMATION

1)

  The appliance installation must conform with 

local codes or, in the absence of local codes, with 
the current Canadian or National Gas Codes, 
CAN1-B149 or ANSI Z223.1 Installation Codes.

2)

  The appliance when installed, must be 

electrically grounded in accordance with local 
codes, or in the absence of local codes with the 
current National Electrical Code, ANSI/NFPA 70 
or CSA C22.1 Canadian Electrical Code.

3)

  See general construction and assembly 

instructions. The appliance and vent should be 
enclosed.

4)

  This appliance must be connected to the 

specifi ed vent and termination cap to the outside 
of the building envelope. Never vent to another 
room or inside a building. Make sure that the 
vent is fi tted as per Venting instructions.

5)

  Inspect the venting system annually for blockage 

and any signs of deterioration.   

6)

  Venting terminals shall not be recessed into a 

wall or siding.

7)

  Any safety glass removed for servicing must be 

replaced prior to operating the appliance.

8)

  To prevent injury, do not allow anyone who is 

unfamiliar with the operation to use the fi replace.

9)

  Wear gloves and safety glasses for protection 

while doing required maintenance.

10)

 Be aware of electrical wiring locations in walls 

and ceilings when cutting holes for termination.

INSTALLATION AND REPAIR SHOULD 
B E   D O N E   B Y   A N   AU T H O R I Z E D 
SERVICE PERSON. THE APPLIANCE 
SHOULD BE INSPECTED BEFORE 
USE AND AT LEAST ANNUALLY BY A 
PROFESSIONAL SERVICE PERSON. 
MORE FREQUENT CLEANING MAY 
BE REQUIRED DUE TO EXCESSIVE 
LINT FROM CARPETING, BEDDING 
MATERIAL, ETC. IT IS IMPERATIVE THAT 
CONTROL COMPARTMENTS, BURNERS 
AND CIRCULATING AIR PASSAGEWAYS 
OF THE APPLIANCE BE KEPT CLEAN.

DUE TO  HIGH TEMPERATURES, THE 
APPLIANCE SHOULD BE LOCATED 
OUT OF TRAFFIC AND AWAY FROM 
FURNITURE AND DRAPERIES.

WARNING: FAILURE TO INSTALL THIS 
APPLIANCE CORRECTLY WILL VOID 
YOUR WARRANTY AND MAY CAUSE A 
SERIOUS HOUSE FIRE.

YOUNG CHILDREN SHOULD BE CARE-
FULLY  SUPERVISED WHEN THEY ARE 
IN THE SAME AREA AS THE APPLI-
ANCE.  TODDLERS, YOUNG CHILDREN 
AND OTHERS MAY BE SUSCEPTIBLE 
TO ACCIDENTAL CONTACT BURNS.  A 
PHYSICAL BARRIERS IS RECOMMEND-
ED IF THERE ARE AT RISK INDIVIDUAL 
IN THE HOUSE.  TO RESTRICT ACCESS 
TO A FIREPLACE OR STOVE, INSTALL 
AN ADJUSTABLE SAFETY GATE TO 
KEEP TODDLERS, YOUNG  CHILDREN 
AND OTHER AT RISK INDIVIDUALS OUT 
OF THE ROOM AND AWAY FROM HOT 
SURFACES. 

Содержание Regency Horizon HZ40E-LP2





































































Отзывы: