Regency Horizon™ HZ40E-2 Gas Fireplace
39
INSTALLATION
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can cause
improper and dangerous operation.
Caution: Ensure that the wires do not touch any
hot surfaces and are away from sharp edges.
PROFLAME SYSTEM GT
PROFLAME SYSTEM GTM
Proflame System
Configuration
886 GTMF
Wire Diagram
SureFire™ Switch
885
Optional AC Adaptor
Proflame System
Configuration
886 GTMF
Wire Diagram
SureFire™ Switch
885
Optional AC Adaptor
WIRING DIAGRAM
This heater does not require a 120V A.C. supply for operation. In case of a power failure, the burner switch and the optional remote control/thermostat will
continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.
(Do not cut the ground terminal off under any circumstances.)
NOTE: Even if the fan is not purchased with the unit, it is still a good idea to bring power to the receptacle box (provided with the unit) in case the
fan is installed at a later date.
Содержание Regency Horizon HZ40E-LP2
Страница 64: ...64 Regency Horizon HZ40E 2 Gas Fireplace NOTES...
Страница 65: ...Regency Horizon HZ40E 2 Gas Fireplace 65 NOTES...
Страница 66: ...66 Regency Horizon HZ40E 2 Gas Fireplace NOTES...