background image

18

Regency FG39-1 FireGenie Freestanding Gas Stove

INSTALLATION

Conversion Kit for NG to LPG Model #360-968

THIS  CONVERSION  MUST  BE  DONE  BY  A  QUALIFIED  GAS  FITTER  IF  IN  DOUBT  DO  NOT  DO  THIS  CONVERSION!

918-578

12/20/06

3

PG121-1 / PG131-1 / FG39-1

Conversion Kit contains:

 

Qty.  Part # 

Description

1    904-529 

5/32" Allen Key

1    904-641 

Burner Orifi ce #50

1    918-590 

"Converted to LPG" label

1    908-528 

Red "LPG" label

1    910-037 

#30 ULPG Pilot Orifi ce

1    918-578 

Instruction Sheet

1)

  Shut off the gas supply and unplug the 

power cord. 

2)

  Open the front door and carefully remove 

the logs and lava rock.

3)

  Remove burner. 

4)

  Remove burner orifi ce with a 1/2" wrench 

and discard. Use a wrench to hold on to 

the elbow behind the orifi ce.

5)

  Reinstall new burner orifi ce LPG stamped 

#50 and tighten. 

Burner Orifi ce

6)

  Pull out the pilot hood by hand.

Pilot 

Hood

Pilot 

Hood

removed

7)

  Remove the pilot orifi ce with the allen key.

Pilot 

Orifi ce

8)

  Put in the new LPG orifi ce with the allen 

key. Then put back the pilot hood.

9)

  Place the pilot hood back on.

10)

 Adjust the burner areation setting to 

fully 

open

 and install the burner.

11)

 Remove the pedestal back cover by remov-

ing the 4 Phillips screws.

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION !!

FG39-1 Conversion Kit #360-968 from NG to LPG

(refer to page 1 for PG121-1 / PG131-1)

Содержание FG39LPG1-BRA













































Отзывы: