Regency U31-10 Gas Fireplace Insert | 29
|
29
installation
FLUSH LOUVER
INSTALLATION
1.
The Top Louver is held in place by friction fit,
if the Louver needs to be adjusted; bend the
bracket out as shown in the diagram.
2.
Install the Spring Hinges on the left and right
side of the bottom of the Firebox using 2 screws
per hinge.
Bottom Louver
Hinge
Location
3.
Place the Bottom Louver near the hinge. Flip
hinge over the Bottom Louver and secure using
3 screws.
FLUSH GLASS
INSTALLATION
1)
Install upper and lower trim.
2)
Slide the glass into the bottom glass support
and secure with the glass clips using the 2
phillips head screws at the top.
Note: To remove the glass, reverse the
procedure.
WARNING
The use of substitute glass will void all product warranties.
Do not operate the appliance if the glass panel(s) are removed, cracked or
broken.
Replacement of the glass panel(s) should be done by a qualified service person.
Lower Trim
Upper Trim
Содержание Energy U31
Страница 4: ...4 Regency U31 10 Gas Fireplace Insert 4 dimensions UNIT DIMENSIONS WITH STANDARD FACEPLATE ...
Страница 5: ...Regency U31 10 Gas Fireplace Insert 5 5 dimensions UNIT DIMENSIONS WITH LOW PROFILE FACEPLATE ...
Страница 46: ......
Страница 47: ......