Using the hex key provided in the hardware kit, insert the key into the screw and
rotate it clockwise until the screw is snug. This will tighten the strap and secure
the gate to the banister post.
Repeat the above steps for other banister post mounts.
NOTE: The buckle can be rotated to any point around the banister post so that it is out
of sight.
Pull the strap so that it is tight
and fold it over to connect the
hook side of the strap to the
loop side.
6
Step 3.
Secure the Hook and Loop Straps & Attached Buckles around the Top and Bottom
Banister Adapters
NOTE: Locking Tabs are only at the top of banister posts. See detailed instructions
below.
Once correclty positioned, pull the strap tight around the banister post
and lock it in place by closing the Locking Tab.
Thread strap around banister
post and through the buckle
side of the strap.
